October 16, 2018
 x 

Cart empty

 

 

Water Sample Testing

Sales price £5.00
Tax amount
Description

Procedure for Elm Leisure Professional Water Test

WHAT WE TEST FOR -

1) P.H

2) T.A TOTAL ALKALINITY

3) CHLOREIN FREE (BROMINE)

4) COMBINED CHLORINE

5) TOTAL CHLORINE

6) CALCIUM HARDNESS

7) T.D.S TOTALLY DISOLVED SOLIDS

8) CYANURIC ACID

9) WATER TEMP

With these test we will help you to achieve an equilibrium with your water balance.

Not only will this help with a reduction of unnecessary expensive chemicals, but it will also help balance corrosive or alkali water, which is not only bad for the pool structure, the equipment and also you the swimmer

PLEASE MAKE SURE THAT THE POOL HAS A CHLORINE COUNT LOWER THAN 3PPM. CHLORINE HIGHER THAN 4PPM WILL VOID THE TEST

1. On receipt of the water bottle, remove cap and plunge the bottle to 300mm below the pool water surface, filling completely

2. Immediately replace the cap on the bottle and place in its carry case

3. Fill out the pool water testing sample submission sheet

4. Return the form and the filled bottle in the self-addressed bag to Elm Leisure

5. Elm Leisure will test the water on reciept

6. Elm Leisure will email the water results to you with a link to the web site for your recommendations

7. Elm Leisure are happy to take calls once you have recieved the results in order to help you correct your water as quickly as possible

Free chlorine, bromine or ozone levels may drop during sample storage. Other parameters such as pH and alkalinity can also change. Samples should therefore be tested as soon as possible after sample collection so post on the same day as the sample was taken.

Site by tIMC