NOTE! This site uses cookies and similar technologies.

Our website uses Cookies to help improve your experience.
If you continue to use this site, you are agreeing to our use of Cookies.

In Business for 50 Years: Luxury Pool Design & Construction since 1973

Indoor Pool 2

Special Chemicals

Regular testing of your swimming pool water will reduce running costs and help with scale, neutral or corrosive water.
See the ranges for Water and Sanitation Balancing HERE

FREE DELIVERY ON ALL ORDERS OVER £60

Blue Horizons Calcium Hardness Raiser

£18.10
Tax amount

Blue Horizons Calcium Hardness Raiser

Ideal Calcium Hardness level: minimum 200mg/l (ppm)

APPLICATION INSTRUCTIONS

  1. Before applying this product it should be pre-dissolved in a clean plastic container at a maximum rate of 100g of product to 10 ltrs of cold fresh water. Stir well to ensure the product is fully dissolved. Repeat application to achieve the total dose required – see table below for dose rates. It is recommended that the total treatment is split into three equal applications with a minimum of 8 hours between each.
  2. After pre-dissolving add the resulting solution to the pool near the inlets with the filtration system in operation.
  3. Following the application the pool water may become cloudy so keep the filtration pump running continuously until it clears.
  4. After treatment check the pH level and if necessary adjust.

Warning: Heat is generated when pre-dissolving this product. Always use clean cold water.